Scag Blade clutch-is it good?

Discussion in 'Mechanic and Repair' started by targetmaster, Feb 22, 2012.

  1. targetmaster

    targetmaster LawnSite Member
    Posts: 1

    I'm repairing an older Scag walk behind. Was told by owner that blade clutch is bad. I got it off and energized it with 12 volt battery and it engages like it is supposed to. That proves it's good, right? That is what I want to be sure about. Think the toggle switch is bad. Any input appreciated, Thanks
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    That shows the coil is good, Make sure both bearings spin (not locked up), If so go to the switch and test for power in and out to the clutch then ground to the clutch....
     

Share This Page