Scag SW Walk behind Wiring Harness needed

Discussion in 'Mechanic and Repair' started by SnapperfanRedmaxman, May 21, 2009.

  1. SnapperfanRedmaxman

    SnapperfanRedmaxman LawnSite Member
    Posts: 54

    I purchased a used SW36-13KA belt drive walk behind that someone cut
    the wiring harness at the connector. I will need both the top and bottom halves. I could use a wiring diagram showing wire colors as well. If you have one that you have scrapped out please let me know. I may also be interested in the regulator/rectifier assy. It has a Kawasaki Engine.
    Thanks in advance.
     
  2. MowerMedic77

    MowerMedic77 LawnSite Bronze Member
    Posts: 1,164

    You can download the owners manual off of Scags web site and they have parts breakdown and wire diagrams for most of them listed under the Operator's Manuals just narrow down your model and serial number.

    http://www.scag.com/OpManuals/SW/SWOPMANTOC.html
     
  3. SnapperfanRedmaxman

    SnapperfanRedmaxman LawnSite Member
    Posts: 54

    Still looking
     

Share This Page