Scag z-cat

Discussion in 'Mechanic and Repair' started by TURF DOCTOR, Feb 18, 2006.

  1. TURF DOCTOR

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    Cleaning the shop today and found a weight for the z-cat,stumped how to mount it,:dizzy: any help
     
  2. lawnmaniac883

    lawnmaniac883 LawnSite Silver Member
    Posts: 2,613

    Any pics would help...
     
  3. steve45

    steve45 LawnSite Bronze Member
    Posts: 1,325

    If you can't post a photo, can you give us a description of what it looks like?

    If it's sort of rectangular, has 'SCAG' cast into it, with three holes in it, it mounts on the back behind the rear wheels (one for each side).

    If it's U-shaped with a retaining pin, it mounts on a bracket on the front of the mower. You'll have to buy a bracket if your mower isn't equipped with it. This is use in conjunction with the grass catcher.
     
  4. TURF DOCTOR

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    Part # 41020 15 3/4 long,5 1/2 wide,2 inches thick 2 bolt holes from the ends 2 inches in, and a notch in the center,dealer is trying to help me we have no paper work for the part waiting to hear from scag.
     
  5. TURF DOCTOR

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    It is retangular no scag logo.
     
  6. lawnmaniac883

    lawnmaniac883 LawnSite Silver Member
    Posts: 2,613

    Duct tape :usflag:
     

Share This Page