Size of blades for my Trimstar Geardrive walkbehind

Discussion in 'Hustler Turf Equip (Archived)' started by Oasislawnman, Apr 23, 2008.

  1. Oasislawnman

    Oasislawnman LawnSite Member
    Posts: 22

    I was wondering what the size of the blade for my Trimstar Geardrive 36" walkbehind Hustler #927640.

    On the parts manuel that you have linked in your sig it says it is 18" part #363291.

    I measured the ones that I got from my Hustler dealer for this mower and the blades are 17 3/4 inches. So will 18" work or will they be to big

    Thanks.
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Everything I have says the same thing, 18".
    If you have the correct part #, then bolt them on and go, make sure the correct part # is stamped into the blade.
    If you measure from blade tip to blade tip going diagonal across the blade you should get a more accurate measurement.

    Pj
     

Share This Page