1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Snapper Powerslice Question

Discussion in 'Mechanic and Repair' started by Supper Grassy, Sep 19, 2010.

  1. Supper Grassy

    Supper Grassy LawnSite Bronze Member
    Posts: 1,582

    i will do that tonight. what type of oil and how much should i add
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    30w or 40w until it's full..... (less than a quart)
     
  3. Supper Grassy

    Supper Grassy LawnSite Bronze Member
    Posts: 1,582

    when looking at the pictures on the page you suggested, in picture 14 the brass piece shown has 3 tiny holes in it that appear to be clogged. How can i go about testing this and un clogging them
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    Spray with carb & choke cleaner followed by compressed air, Be careful not to blow it out of your hand....
     
  5. Supper Grassy

    Supper Grassy LawnSite Bronze Member
    Posts: 1,582

    Thanks a bunch the air did it. Running like a champ
    Now
    Posted via Mobile Device
     
  6. Supper Grassy

    Supper Grassy LawnSite Bronze Member
    Posts: 1,582

    now the only issue i have is the clutch cable i ordered for the machine is not like the one i took off and will not work. I only found the 50001 when looking for parts so i think it must have been a design change
     

Share This Page