Snow Blade and Cab

Discussion in 'eXmark' started by Pat Daniels, Dec 6, 2003.

  1. Pat Daniels

    Pat Daniels LawnSite Member
    Posts: 49

    Is Exmark coming out with a snow blade and cab for the Lazer in 2004? If so do you have any specks, pricing.
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Pat,

    Thanks for the post. I am not aware of any plans for a cab at this time. There is however a specialty manufacturer of snow removal equipment that does make attachments for the several Exmark products. You can contact them at:

    Agro-Tec/Rad International
    Contact: Kenny King
    Address: 147 Sausalito Dr. Boynton Beach, FL 33436
    Phone: 1-888-229-5464
    Fax: 1-561-733-4887
    Customer support and general e-mail: agrotec95@aol.com


    Please let me know if we can be of any further assistance.

    Thanks

    Terry
     
  3. Pat Daniels

    Pat Daniels LawnSite Member
    Posts: 49

    Ok. Has anybody on this forum ever tried the snow removal equipment and/or purchased the cab. Been to Louisville and St Louis shows and dont recall seeing this company there.
     
  4. Doc Pete

    Doc Pete LawnSite Gold Member
    Posts: 3,469

    I may be talking out of turn since I've never used a cab. However, since I'm a long time snowblower, I have realized this. Unless you have plenty of heat in the cab, and a wiper for snow I'd use something else. It gets very cold not moving. Actually people ask me how I can snowblow. I use a snowsuit and within 15 minutes I've got it opened up and it's still zero out. As long as you are moving you will stay very warm. Of course, this is why guy's plow with a truck (G).
    Good luck,
    Pete
     

Share This Page