Split FA

Discussion in 'Irrigation' started by irrig8r, Jul 14, 2008.

  1. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

    Weird split in a 3/4 FA. Split on the slip side, not the threaded side. The nipple into the threaded side was not much more than hand tight.

    Spears fitting I installed about 3 weeks ago.

    0714081708.jpg
     
  2. Wet_Boots

    Wet_Boots LawnSite Fanatic
    Posts: 47,370

    fitting weevils
     
  3. Mike Leary

    Mike Leary LawnSite Fanatic
    Posts: 21,910

  4. irrig8r

    irrig8r LawnSite Platinum Member
    Posts: 4,535

    Just wondering if it was a bad batch...or maybe the pipe was out of spec...
     
  5. CAPT Stream Rotar

    CAPT Stream Rotar LawnSite Fanatic
    Posts: 5,908

    hahahah!


    check out the contractor with always a good excuse
     
  6. DanaMac

    DanaMac LawnSite Fanatic
    Posts: 13,156

    We had two 1" PVC threaded unions split recently. One was the original, and the other split three days after installing. Threaded onto an MA. Ripped it out yesterday and just glued together.

    Yours is one I haven't seen before, splitting on the slip side.
     

Share This Page