ST-2 STIHL BR Series Blower Rack by TrimmerTrap

Discussion in 'Mechanic and Repair' started by Michael J. Donovan, Jun 27, 2006.

  1. Michael J. Donovan

    Michael J. Donovan Head Moderator, Online Communities Staff Member
    Posts: 3,390

    The ST-2 is the only rack designed specifically for the STIHL 500 & 600 Series blowers. Simply set your blower on the lower posts and pivot the top toward the rack, allowing the "sliding lip" to, slide under the handle. Complete installation by pulling the ball knob on the rack and lowering the "sliding lip" over the blower. The blower is secured at the top and bottom and will not move around.

    •Extremely fast "in and out time."
    •Locks with a standard Padlock.
    •Heavy gauge welded steel construction is plated for corrosion resistence.
    •Mounts to open or enclosed trailers and includes mounting hardware.

    here's a link - http://www.trimmertrap.com/racks/st2.htm
     

Share This Page