Stander X - Possible Hydro problem

Discussion in 'Wright Manufacturing, Inc. (Archived)' started by THG, Sep 7, 2012.

  1. THG

    THG LawnSite Member
    Posts: 149

    Dear Wright,
    I have a new Stander X with around 88 hours on it. Last week the hydro movement became a little jerky and wants to tear turf when turning. At the same time, if you let go of the steering levers they do not snap back to neutral and the mower will start slowing but keep going. I have this mower in the shop but was checking to see if you have seen this? Can you provide an email address outside of this forum?

    Thanks Steve.
     
  2. WrightCommercial

    WrightCommercial Inactive
    Posts: 526

    Steve,

    You can email us thru our website, in the "contact us" area pick service fill out the information fields and add your comment. I believe I spoke with the distributor this morning about your mower. The dealer will be swapping the pumps, its an internal issue causing friction in the pump.

    Best Regards
    Wright Mfg.
     
  3. THG

    THG LawnSite Member
    Posts: 149

    Thanks for the update.
     

Share This Page