Sticky throtle cable on metro 14 kaw

Discussion in 'eXmark' started by MacLawnCo, Oct 29, 2002.

  1. MacLawnCo

    MacLawnCo LawnSite Bronze Member
    Posts: 1,847

    My throttle cable is sticking rather badly on my 48" metro 14 kaw. How do i fix it?:waving:
     
  2. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    You can either replace the cable or get one of those motorcycle cable lubers. I use the cable luber. Available where-ever fine motorcycles are sold. :D

    Just disconnect the cable at the engine and attach the luber and squirt some WD-40 into the cable. Works like a champ!
     
  3. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    MacLawn,

    I've never tried the luber but it's worth a shot. Generally when a cable gets tight it's either bent or it's rusted. Generally I recommend replacement but the cable luber might be worth a shot.

    Thanks

    Terry
     
  4. Green Pastures

    Green Pastures LawnSite Silver Member
    Posts: 2,457

    I usually just shoot some WD-40 down the cable. Or you can use Sea-Doo lube in a can if you have some lying around. It's like $7.00 a can. It has a thicker consistency than WD-40.

    If I didn't own a SEA-DOO and have this stuff lying around, I'd use WD-40.

    Scott
     
  5. MacLawnCo

    MacLawnCo LawnSite Bronze Member
    Posts: 1,847

    Thank you kindly.;)
     

Share This Page