Striping Kit for a JD 727A ?

Discussion in 'Lawn Mowing' started by Tony1045, Jul 16, 2004.

  1. Tony1045

    Tony1045 LawnSite Member
    Posts: 77

    Hi, I just purchased a new John Deere 727A today and was wondering if anyone has any information on a striping kit for it ? According to the dealer, JD does not currently make a striping kit for their ZTR's. Just wanted to get some feedback on what if anything everyone is using and/or doing. Thanks Tony :drinkup:
  2. DLCS

    DLCS LawnSite Platinum Member
    Posts: 4,379

    JD does make a striping roller for the 60 and 72 inch 7 Iron decks only right now. I would just make my own using some chains or a piece of rubber.
  3. gl1200a

    gl1200a LawnSite Senior Member
    Posts: 518

    Here is mine I made for my 727A. A used semi mudflap, steel, bolts and paint and I have about $4.00 in it. It stays at a height of about 1/4 inch off the ground and lays great stripes on a think lawn.

    coral lawn care  lawnsite i.jpg
  4. Tony1045

    Tony1045 LawnSite Member
    Posts: 77

    Thanks, I like the mud flap idea, think I'll give it a try. Tony

Share This Page