Striping roller on tt 52

Discussion in 'eXmark' started by John Gamba, Nov 8, 2003.

  1. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Terry or Dustin

    Will i be able to put a striping roller From exmark on a 2004 tt 52?

    Thanks John
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Johnny G,

    Here is what I know on this. If their is room between the back tires and the rear of the deck, the roller should work. The anti-scalp brackets are the same distance, so the roller will be the same length.

    We are not building this unit right now. Can you tell me how much room is between the drive wheel and the anti-scalp bracket?

    Thanks, Fred.
     
  3. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Fred
    If your not making it then i dont think it would work. A company called ezchute.com was making a roller for the tt but they don't show it anymore. I wish exmark would get on these things so they (the tt) can stripe like the lazer.
    John
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Johnny G,

    Well you never now unit you ask. We will be make a striping roller to fit the TT52-60. It will be ready for next year. How do like that!!

    Thanks, Fred.
     
  5. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Thats What i heard and was asking. I like that ALOT!!!!!!!! OH it will be a 60" TT.
    Johnny G.

    899-300.jpg
     
  6. ple_1969

    ple_1969 LawnSite Member
    Posts: 204

    What about the TTHP models? Will you make a striping roller for those too?

    Pete
     
  7. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Pete,

    The Turf Tracer HP and Metro HP will both be getting rollers as optional equipment. The testing, fit up etc. is complete. The raw materials have been ordered and we're getting close. Right now if everything goes according to plan we should have inventory by late December. Just in time for Santa.

    Thanks

    Terry
     
  8. John Gamba

    John Gamba LawnSite Fanatic
    from ct
    Posts: 10,812

    Terry
    What size decks on the hp will get the roller?
    Have a great weekend!!!
    Johnny G.
     
  9. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Johnny,

    All of'm. 36", 48" and 52"

    Have a great weekend.........and put some clothes on.

    Imagine my shock when the very first thing I see when I log onto the forum this a.m. is you in the hot tub.

    All in fun.

    Have a good weekend

    Terry
     
  10. ple_1969

    ple_1969 LawnSite Member
    Posts: 204

    Terry,

    Thanks for the great news! Will the rollers be just for the 2004 models?

    Pete
     

Share This Page