1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Stump The Technician,,,Name That Tool

Discussion in 'Mechanic and Repair' started by piston slapper, Oct 26, 2012.

  1. Breezmeister

    Breezmeister LawnSite Bronze Member
    Male, from South Jersey
    Posts: 1,458

    I'm just wondering if you have ever use this on the blind bearings in trimmer gearheads ? Sounds like it would work...
     
  2. 44DCNF

    44DCNF LawnSite Bronze Member
    Posts: 1,459

    I've not used it there.
     
  3. Richard Martin

    Richard Martin LawnSite Fanatic
    Posts: 14,700

    Just use grease. That's how I get pilot bearings out. Fill the bearing with grease. Find a socket that is the same as the inside of the bearing. Put an extension into the socket the wrong way and hit it with a hammer.
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024


    Ditto.....But use my trusty Matco clutch alignment tool to pop them out.....

    [​IMG]
     
  5. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,440

    Little screen and walking at the mall. Your right not tapered.
    Posted via Mobile Device
     
  6. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Try These....
    The one that guesses the AGE of tool #1 gets a slab of Cyber Ribs..
    Hint..5 digit patent #...

    IMG_0281.JPG
     
  7. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    To be fair to all my fellow mobile phone users...a closer look..

    IMG_0284.JPG
     
  8. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    Here's a try..... 17th day of 2nd month 1921, But I find it hard to believe there was something like this back then ?
     
  9. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Not even in the right century...:waving:
     
  10. Breezmeister

    Breezmeister LawnSite Bronze Member
    Male, from South Jersey
    Posts: 1,458

    Number 3 is a Swiss Army Screw Driver from
    before the second world war, with an awe, Philips and a
    wine bottle opener. It came with the Swiss Army bike
    as did # 6, Swiss Army valve tool.....:laugh:
     

Share This Page