1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Stump The Technician,,,Name That Tool

Discussion in 'Mechanic and Repair' started by piston slapper, Oct 26, 2012.

  1. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Thanx Dutch...
    I'm thinking that the tools were for removing and repairing a hydralic shaft..
    The pipe with the cutter is for truing up the end of a boogered up shaft..
    The steel plate with the hole is a ...go...no go.. gauge to make sure the shaft is trued up good enough..
    The spanner is to remove the gland nut on the hydraulic cylinder...

    Just a guess....
     
  2. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Thanx for a great thread....

    SLAPPER
     
  3. BigFish

    BigFish LawnSite Silver Member
    Posts: 2,911

    It ain't over yet...........I still got more high quality tools to show!!!!!!
     
  4. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    I still have that endless loop of the Jeopardy theme song around here somewhere...if you need it...:waving:
     
  5. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Hmmmm......Hmmmmm.....where have I heard this before..?????
    Let's get on with the Stumpin....:waving:
     
  6. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    OK Fish....You have us waiting with BAITED breath......
    They didn't get you busy wrenchin on those Daytona cars...did they..???
     
  7. BigFish

    BigFish LawnSite Silver Member
    Posts: 2,911

    I'll get to em', just been a tad busy.
    I was hoping to spark some more interest from others..........
    Don't look like it though.
     
  8. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Ever wonder what to do with your spark tester when the spring clip breaks off..???

    IMG_0327.JPG
     
  9. Breezmeister

    Breezmeister LawnSite Bronze Member
    Male, from South Jersey
    Posts: 1,458

    I'm guessing that the jumper wire is grounded to the
    muffler ? Personally, I like to find someone to hold the spark plug for me while I pull the recoil (Evil Snicker)
     
  10. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Yeah...you guessed right..plug wire on 2 strokes is usually too short to ground the tester..

    I like your idea...getting someone to hold the sparkplug...though its not real popular around the shop...:waving:
     

Share This Page