Stump The Technician,,,Name That Tool

Discussion in 'Mechanic and Repair' started by piston slapper, Oct 26, 2012.

  1. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    That's a lot safer than gasoline...kerosine...or diesel....
    I'm guessing the,ATF also slows down the evaporation...
    Do you backwoods Billys use a real parts washer.???
    Or use a mortar mixer to slosh the parts and fluid around..????
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024


    Slapper...... We found parts get jammed between the paddles and damaged, Sooo...... We now use the concrete mixer, Much easier on all parts !!!



















    We've got two of this style;

    [​IMG]

    And one of this style;

    [​IMG]


    Try filling all of these up with some high dollar fancy pants cleaning solvent !!!
     
  3. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    I can tell you guys never used a partswasher service company....
    They come in every 12 weeks to service and topoff and charge bout $125...whether it needs it or not..
    If they have to change the fluid...its bout $225...really...
    The whole deal is about hazardous waste... who owns it..and how it is disposed of..
    There are some crazy fines if the EPA ever walks into your business and you don't have documentation...
    For instance...if your used oil drum or used fuel drum is not properly labeled with the sticker from the recycling company you use..
    Its a $1200 fine on each drum....seen it happen...its not good to piss those people off...
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    Years ago we had Safety Clean...... Now we have Restro Clean, Not to worry..... All waste and fuel storage tanks (not drums) are labeled..... ;)
     
  5. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Still waitng.....
     
  6. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,528

    It did quiet down here a bit. Then again I'm a cramped up overheated mess at the end of these days.
    Posted via Mobile Device
     
    ericg likes this.
  7. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    10 4.....
    I just changed my workin hours to 8 to noon....mon to fri....daring my boss to fire me..
    It ain't worth it....Hanoi Hothouses were outlawed in the Geneva Convention...
     
  8. joe billy

    joe billy LawnSite Member
    Posts: 35

    You havin a problem with the heat or the guy you're workin fer.?
    You're one of the few people I know that would prolly make more money if you wernt tied down to one job.
    You can always drag that jumbo smoker up to the panhandle and ply your wares round here.
    Posted via Mobile Device
     
  9. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    joe billy.....It gonna take more than moral support to get me to relocate to the panhandle..
    Start with about 50K..full benefits..moving expenses..and a years supply of alpo for my kids..
    Then..theres the downtime of tooling around with my new smoker in RestroRob ville..
    shouldnt take more than a month...
    Save me some of those shark steaks..
     
  10. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Name that tool..

    IMG_0398.JPG
     

Share This Page