Submerged DixieChopper

Discussion in 'Mechanic and Repair' started by piston slapper, Oct 9, 2012.

  1. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Well...My favorite crew has done it again...put another Chopper in the water..
    This time they got me...I instructed them not to crank the engine when they called and told me they put a mower in the lake...They figured that because the engine wasnt completely under water...they could go ahead and drive it on the trailer...These are the same guys that figured how to put the mower into the lake...Maybe they figured I wouldnt find out...They trashed the hydro's..

    The tank went under and got a few quarts of water in it..When they cranked the engine ...the pumps circulated and mixed all that water into the hydro system...Where were these guys when I had my shop, I"d still be in business...

    WANTED...CREW LEADER IN TAMPA AREA ...MUST HAVE GOOD DL AND PASS THE SQUARE PEG AND ROUND HOLE TEST.....PM ME.....DFWP....

    IMG_0229.JPG

    IMG_0230.JPG

    IMG_0231.JPG
     
  2. Darryl G

    Darryl G LawnSite Fanatic
    Posts: 8,033

    The key to putting a square peg in a round hole is the use of a BFH! Do I get the job?
     
  3. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    If it fits...it fits....
    I'm afraid you're overqualified...you figgered it out way too fast...
    That's the last thing we need around here....2 overqualified people...
    Posted via Mobile Device
     
  4. Darryl G

    Darryl G LawnSite Fanatic
    Posts: 8,033

    Awww..guess I can unpack my bags now :(
     
  5. lotsagrass

    lotsagrass LawnSite Senior Member
    Posts: 610

    Yikes. That's crazy.
     
  6. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,711

    Slapper I thought you were a full time wrencher? :usflag:
     
  7. Duekster

    Duekster LawnSite Fanatic
    from DFW, TX
    Posts: 7,961

    Lord have mercy.

    Good Luck
     
  8. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Trying to stay that way...This crew has done about $7000 to $10000 damage in the past few months...not counting today's mess...
    Everytime they get rid of the crew leader..they promote from within...or hire somebody that needs OJT...that gets trained by members of that crew..
    Then... they usually run them off within a week or 2...
    Just trying to get a few resume's to fill a position that has been vacant too long...
    If they keep tearing stuff up...iI may just shop my own resume...while all my certs are still up to date....:walking:
     
  9. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,240

    Gotter Dun...Vacuumed out the hydro's..changed out all the fluids and filters...VIOLA...

    BTW..The job opening is real...Might help if you are bilingual....
     
  10. Patriot Services

    Patriot Services LawnSite Fanatic
    Posts: 12,711

    Tomorrow is a new lake errr day.
    Posted via Mobile Device
     

Share This Page