1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Super Z stripping kit questions

Discussion in 'Hustler Turf Equip (Archived)' started by dannyc33, Feb 7, 2003.

  1. dannyc33

    dannyc33 LawnSite Member
    from indy
    Posts: 95

    I was wondering if it would be possible to put a roller stripping kit on my Super Z, like an Exmark. I'm not sure I can because of the black support bar on the back of the deck. Could it go anywhere else?
    Right now I have a chain kit on back, but am considering moving it underneith and hooking it up on one of the yellow bars between the wheels. I'm also going to add a rubber strip either on the deck or on the other yellow bar for ultimate stripping.

    Does anyone have any idea on how to make the roller work, since rollers stripe the best. And how have you other fellow Super Z onwers added stripping kits? Got any pics?

    Any help would be greatly appreciated!
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    There is no room to mount the striping roller on the back of the Hustler decks.
    There are a couple of members here that have mounted a chain striping kit to the back of the frame on there Super Z's.
    KirbysLawn and Excel25 are the 2 that I know of.
    Guys do you have a couple pics you can share ?
    Also, there is a aftermarket company that makes a rolling type to fit the Hustler Z's, PM me and I will get you that info.

  3. KirbysLawn

    KirbysLawn Millenium Member
    Posts: 3,486

    Here is the one I made. I will ahve to do some fixin the bar bent some and I must figure how to re-work it.

    stripe kit 1.jpg
  4. excel25

    excel25 LawnSite Senior Member
    Posts: 393

    I had the chains on and got them stuck in my trailer ramp. just go to H/D or lowes got angel iron with holes, Held bar on with C clamps. Now have a rubber strip I put on back of deck, works great.
  5. dannyc33

    dannyc33 LawnSite Member
    from indy
    Posts: 95

    that's how I did mine, but mine extended out to the inner wheels.
    Is there away to get a chain kit under the mower, mine gets bent too sometimes.

Share This Page