Surface Cleaner Adaption

Discussion in 'Power Washing' started by Roof Cleaning Raleigh NC, Aug 10, 2011.

  1. Roof Cleaning Raleigh  NC

    Roof Cleaning Raleigh NC LawnSite Member
    Posts: 67

    I made an attachment so I could use my wand without having to go to trailer and shutting down the pressure washer and then restarting it after hooking up my gun. I added a T & a 9' piece of hose.

    100_0474.jpg

    100_0475.jpg

    100_0476.jpg
     
  2. Mike B.

    Mike B. LawnSite Member
    Posts: 19

  3. Roof Cleaning Raleigh  NC

    Roof Cleaning Raleigh NC LawnSite Member
    Posts: 67

    I didn't want that. I buy everything from Bob.
     
  4. JCinNJ

    JCinNJ LawnSite Member
    Posts: 159

    pretty cool, how did you attach the PVC?
     
  5. Roof Cleaning Raleigh  NC

    Roof Cleaning Raleigh NC LawnSite Member
    Posts: 67

    I drilled a quarter size hole in the top of the PVC so i could get my nut driver in. Then I used a self tapping screw. Also used a self tapping screw on the Velcro.
     

Share This Page