Surging

Discussion in 'Mechanic and Repair' started by vipermanz, Dec 27, 2001.

  1. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    i just got finished rebuilding it now, there was the dirty stuff in the fuel bowl, cleaned it up to perfection and will try again tommorow:)
     
  2. Robert Doubrava

    Robert Doubrava LawnSite Senior Member
    Posts: 342

    Did you put a carb kit in it? That's what I need to put in my rider and my grandfather's edger. Post back with your results! Hope it worked well.:)
     
  3. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    i didn't use a kit,(wrong term)?,but i think it was just clogged up in the first place,

    Thanks for all you guys help, You led me to another successful end!:)
     
  4. Robert Doubrava

    Robert Doubrava LawnSite Senior Member
    Posts: 342

    A carb kit contains gaskets, springs, screws, etc. Just curious about it. Glad you got it fixed!!:) :) :)
     
  5. big james

    big james Banned
    from texas
    Posts: 152

    CAN YOU MOVE THE THROTTLE SHAFT BACK AND FOURTH IN THE CARB HOUSING ? IF THERE IS SLACK IN IT YOU WILL NEVER GET IT TO ADJUST RIGHT CAUSE AIR IS PULLED IN AT THIS POINT ,WHICH IS DOWNSTEAM OF WHERE FUEL AIR IS MIXED
     
  6. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    it's fixed now , it was a gunked up carb, but thank you for the help:)
     

Share This Page