1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Swivel wheel sulky behind a 36" hydro WB?

Discussion in 'Lawn Mowing' started by DA Quality Lawn & YS, Nov 14, 2012.

  1. fatboynormmie

    fatboynormmie LawnSite Bronze Member
    Posts: 1,102

    Da I like the 15" arm the best on my x2
    Posted via Mobile Device
  2. fatboynormmie

    fatboynormmie LawnSite Bronze Member
    Posts: 1,102

    Here are a couple pics of the x2.To support the chain that holds the x2 up in transport mode I added a 1/2"x1" metal strap across the front handlebar bulkhead and attached with (3) 3/8" bolts.The metal on the bulkhead is too thin to support the weight of the x2 by itself.When drilling the center hole for the chain be mind full of the adjustable speed rod .You need to drill just off center as to not interfere with the rod

    I'm sure there could be other ways to mount the chain this is just the way I mounted it on both my Turf Tracers.




Share This Page