Texas Bragg brake wiring - Need help!

Discussion in 'Trucks and Trailers' started by integrityman, Aug 17, 2012.

  1. integrityman

    integrityman LawnSite Bronze Member
    Posts: 1,713

    Recently bought a Texas Bragg trailer- used. The brakes were/ are not hooked up.

    Do TB trailers have a ground wire or just a power wire going to the brake assembly?


    CLARK LAWN LawnSite Silver Member
    Posts: 2,526

    There are 2 wires on each brake one for power and one for ground. Don't matter which way you hook them up.
    Posted via Mobile Device
  3. White Gardens

    White Gardens LawnSite Fanatic
    Posts: 6,776


    The only other thing I will suggest is to ground both brakes on each axle to the same spot. This way you get an even current or draw on both brakes.

    On my equipment trailer, the ground for one axle was on one side of the frame, and the second axle was on the opposite side of the frame. Not sure if that makes a difference or not, but I can see the logic in it.

  4. integrityman

    integrityman LawnSite Bronze Member
    Posts: 1,713

    as I suspected- thanks!!!

Share This Page