The August/06 Everything Goes Striping Contest

Discussion in 'Original Pictures Forum' started by Daner, Aug 2, 2006.

  1. Daner

    Daner LawnSite Bronze Member
    Posts: 1,308

    [SIZE="3"Welcome all to the August Striping contest.
    Staights ,,,Curves...Flags...You name it...any kind of patern or stripe counts here In this contest...Also use what you please to stripe It...rollers chains Ruber Mats...and ole pair of boots...maybe the hood off the old truck out the back forty. Let us Know what equipment you used to do your striping.
    Best of luck to yaa all ...This will be the last monthly striping contest for this year...But then..... There will be a stand off between the top three of june /July/ and Aug....
    9 stripers will go for the title.
    I will see If I can get some Prizes for the winners of the stand off. message me if you would like to donate a prize for these striping events.
    The winners will be announced Sept 2nd
    Best of Luck All
    Daner[/SIZE]
    /////////////////////////////
     
  2. procut

    procut LawnSite Bronze Member
    Posts: 1,853

    Perfectly straight :)
    52" Toro Z Master

    awsome stripes.jpg
     
  3. Daner

    Daner LawnSite Bronze Member
    Posts: 1,308

    Nice and straight...Good Eye Pro Cut!
     
  4. DodgeTruckMan731

    DodgeTruckMan731 LawnSite Senior Member
    Posts: 414

    here they are
     
  5. DodgeTruckMan731

    DodgeTruckMan731 LawnSite Senior Member
    Posts: 414

    oopps sorry gotta resize them
     
  6. DodgeTruckMan731

    DodgeTruckMan731 LawnSite Senior Member
    Posts: 414

    not to shabby for a 16 year ole and a 21" craftsman with a custom striper, i will post pics of the striper if anybody asks. Happy striping to everybody

    Picture 028.jpg

    Picture 018.jpg
     
  7. Daner

    Daner LawnSite Bronze Member
    Posts: 1,308

    Wow...Your kicken azzz With that 21er,,,An yaa lets see the striper.
    Daner
     
  8. DodgeTruckMan731

    DodgeTruckMan731 LawnSite Senior Member
    Posts: 414

    the stock one is till on there too cause i couldnt figure out a way to mount it on but what i di was i took a pices of 1 1/2" pvc cut down the middle of it the slid it onto the old striper then screwed it in capped one side filled it with sand capped the other and thats it works nice, i can lay some mean stripes with it on a nice lawn unfoutantly the lawn pictured has alot of bentgrass in it so it looks like the stripes just stop in some points.

    Picture 029.jpg

    Picture 030.jpg
     
  9. Gatewayuser

    Gatewayuser LawnSite Bronze Member
    Posts: 1,734

    Here are my entries so far made with a 48" bobcat w/b with NO striping kit plain stock mower.

    #1

    s5.jpg
     
  10. Gatewayuser

    Gatewayuser LawnSite Bronze Member
    Posts: 1,734

    picture #2 all taken this week.

    s4.jpg
     

Share This Page