THEGOLDPRO'S Stripe/Equipment thread.

Discussion in 'Original Pictures Forum' started by THEGOLDPRO, Mar 28, 2013.

  1. RSK Property Maintenance

    RSK Property Maintenance LawnSite Bronze Member
    Posts: 1,486

    looks good you must be killing it with fall clean ups, like around 20k if not more. you do some serious clean ups. are your hurricanes all stock still? I debadged the front decal where it said 314 on the impeller cover. my company name is going there, and I took off my front bumper to get it rhino lined black, so that way when its parallel parked on my trailer the bumper doesn't rub on the trailer and get all scratched up. the place called and it was actually done today, but I didn't have time to pick it up. I was thinking about having the wheels powder coated gloss black too, gotta see what the turn around time is gonna be.

    http://www.superbrightleds.com/more...-duty-off-road-led-light-bar--18w-/1479/3240/

    and this is getting mounted next week hopefully.
     
  2. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    Lol on one of mine I mounted an led work light years ago, I never used it and ended pulling it off one day to mount to one of my salt spreaders. I also mounted an led amber tir3 warning light, I use that quite often when blowing off road ways.
    Posted via Mobile Device
     
  3. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    I'll take a pic of the wire you need to unplug for the low oil switch tomorrow.
    Posted via Mobile Device
     
  4. RSK Property Maintenance

    RSK Property Maintenance LawnSite Bronze Member
    Posts: 1,486

    you have a few guys working for you, so you guys probably stop working at 4-4:30 i'm doing things on my own this year, and even in past years I would finish blowing leaves in the dark.

    sweet thanks. you can just send it to my phone via text message if you want. 860-573-1244 thanks
    -ryan
     
  5. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    Np man.
    Posted via Mobile Device
     
  6. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    Decided to rebuild the red ram this season, shes got some caner and some other small problems, She will be off to the body shop this week to have the rust repaired then a fresh coat of paint, then the flatbed goes on, We are also sanding the frame and applying por15.
    [​IMG]
    [​IMG]
    Picked up the flatbed today with the Ferd
    [​IMG]
    [​IMG]
     
  7. Chris_NC06

    Chris_NC06 LawnSite Fanatic
    Male, from Sanford, NC
    Posts: 6,793

    Good to see it get a new lease on life. You keeping it the same color?
    Posted via Mobile Device
     
  8. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    Yea same color, we decided if she lasted through lady winter without any problems we were gonna rebuild it.
    Posted via Mobile Device
     
  9. scag3wheel

    scag3wheel LawnSite Member
    Posts: 21

    I love srw short beds, actually thinking about doing it to my truck. Can't wait to see pics of it on the truck.
    Posted via Mobile Device
     
  10. RSK Property Maintenance

    RSK Property Maintenance LawnSite Bronze Member
    Posts: 1,486

    how many years has that truck been in service for you? I'm starting to redo my f-350 this weekend, its been good to me. I bought it right before I officially opened my business in april of 2011 with 238,000 and I just hit 287000 miles tonight, the motor is getting pulled this weekend, and all leaks are getting fixed, its getting an egt, boost, trans temp gauge, the oil pan isn't rusted but while the motor is out i'm replacing that the rear main seal, anything else that is known to leak and tough to reach when the motor is in, my 3" down pipe is going on along with my 4" straight piped exhaust I have. then its getting injectors, even though it only needs injector o-rings but i'm already gonna have the injectors out, and to do the o-rings is 600 new injectors are 1200, and I can add a few hp if I want to. then its getting fenders, bumpers, doors, cab corners, and a bed then its off to paint. i'm gonna hold off on the body panels until spring time, sounds crazy to redo the body right before winter in my opinion.
     

Share This Page