Thinking about this shed...

Discussion in 'Lawn Mowing' started by Lawn-Scapes, Jul 12, 2004.

  1. Lawn-Scapes

    Lawn-Scapes LawnSite Silver Member
    Posts: 2,810

  2. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    man, don't ever try to put together a metal shed, Arrow has a great product and uses U.S Steel, but it was the most confusing thing i've dealt with...
     
  3. Lawn-N-Garden Guy

    Lawn-N-Garden Guy LawnSite Senior Member
    Posts: 321

    How about a 26 x 40
     
  4. Lawn-N-Garden Guy

    Lawn-N-Garden Guy LawnSite Senior Member
    Posts: 321

    lets try this again
     
  5. Lawn-N-Garden Guy

    Lawn-N-Garden Guy LawnSite Senior Member
    Posts: 321

    here is another of the post construction
     
  6. Lawn-N-Garden Guy

    Lawn-N-Garden Guy LawnSite Senior Member
    Posts: 321

    here is a pick of the old garage that was 20 x 25
     
  7. op4_camper

    op4_camper LawnSite Member
    Posts: 99

    I have one or one just like it. Its been up for almost 10 yrs. Sears use to have them. They take time to put together. They also dent very very easy.

    The walls are only

    A hair is only like .002 to .003 .Thats why they dent so darn easy.

    On the plus side they look nice and they don't rust out. I used a dab of silicone on every screw as I put it together. Alot of times company's have a good product only to rune it with cheap hardware. Nothing like having a new shed with rust lines at every bolt with in a year.
     

Share This Page