Thinning Fluid Film

Discussion in 'Eureka Fluid Film' started by BeeZee, Nov 13, 2007.

  1. BeeZee

    BeeZee LawnSite Member
    Posts: 5

    I am using a Sure Shot sprayer.

    I have put 20 ounces in a glass jar and put it in a microwave for about 1 1/2 minutes, was luke warm, and then stirred it up and put it in the sprayer with 110 psi of air.

    The FF came out in a couple of streams instead of a spray. So my question is how much vegetable oil would you mix in with the FF. Would you heat up the vegetable oil?

    Is there anything else that you could use for thinning.

    Thanks, Bernie.
     
  2. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    You know, I wouldn't really recommend thinning. If you were to thin it, I'd just start off with a small amount and add as needed.

    The best way to spray Fluid Film[​IMG] is with an undercoating gun (Eastwood makes one that works excellent for about 20 bucks), or with an airless paint sprayer, like a Wagner.
     

Share This Page