Toro 44" Proline Hydro Drive - 17 h.p.

Discussion in 'Marketplace' started by wildscape, May 31, 2011.

  1. wildscape

    wildscape LawnSite Member
    Posts: 7

    TORO – Mid Size Proline – Professional Grade
    Pistol Grip, 2- Independent Twin Hydraulic Pumps and Wheel Motors (Fwd/Rev)
    17 H.P. Kawasaki Engine OHV V-Twin
    44” Side Discharge
    Electric Start & Pull Start
    Hour meter
    New/ Mint Condition, only 75 hours of run time.
    Forward and Reverse – No Shifting. 0-6.0mph forward ground speed, 0-3.0 Reverse
    Floating Deck – Easy to Change Vertical Pin Height Cut System; 1”-4.5” (in .25” Increments)
    Fast 18,000+ ft/min Blade Tip Speed (3 Blades)
    Rugged Carrier Frame 2”x 2” Tubular Steel Construction
    Large 5 Gallon Fuel Tank w/ Wide Fill Neck Opening
    Includes 2-Wheel Velke & Large Capacity Grass Catcher, Owner Manual &Service Manual

    I am the original owner. This unit has all the bells and whistles in order to keep down physical fatigue. This machine is pristine & will not cause you any problems. You could buy cheaper, but most have thousands of hours on the machine and engine. If you don’t mind a few hours on the machine, it is like buying new, but for thousands less. Great Deal.

    Price $4150. Negotiable. Serious Inquiries - Please.

    pics 123.jpg

    pics 127.jpg

    pics 131.jpg

    pics 140.jpg
     
  2. scagfreek

    scagfreek LawnSite Member
    Posts: 138

    how much will the bag hold
     
  3. wildscape

    wildscape LawnSite Member
    Posts: 7

    The bag is rated at 3 bushels. The complete assembly instructions and parts list is included.
     
  4. scagfreek

    scagfreek LawnSite Member
    Posts: 138

    how hard is it to remove because i have a yard that the owner makes me bag or i lose the contract and it is a 3/4 acer so i am out there with 4 guys with 21 for ever and i have a bad back but i still get out there and push bu i personnel bout one with casters so i did not kill myself but this with the ride on would be nice but i have problems with them roting yearly because i normally mow its wet there because they have a bad water standing problem
     
  5. wildscape

    wildscape LawnSite Member
    Posts: 7

    The bagger assembly consists of the bagger and a mounting back plate. To convert to bagging; just add the mounting back plate, by simply sliding it into the mower frame (no tools required), then add the bagger by sliding the pins on each side into the back plate and lock the latches on each side. Taking the bagger off only requires the operator to unlatch the bagger and use the handle on the bagger to carry and dump the grass clippings.
     
  6. metro36

    metro36 LawnSite Silver Member
    Posts: 2,411

    Is the unit still available?
     
  7. wildscape

    wildscape LawnSite Member
    Posts: 7

    Metro36, yes, the machine is still for sale.
     
  8. metro36

    metro36 LawnSite Silver Member
    Posts: 2,411

    Would you be able to ship the unit?
     
  9. wildscape

    wildscape LawnSite Member
    Posts: 7

    Metro36, I believe shipping a unit of this size and weight would be excessively expense for you. I also think you may want to inspect and test run any piece of equipment that is a costly investment. However, if you still want the machine, you will have to make the shipping arrangements, and full payment would be required prior to shipment. Thanks for asking.
     
  10. metro36

    metro36 LawnSite Silver Member
    Posts: 2,411

    Well I am having a very hard time finding one around here. A 44 fits my needs perfectly. I am going to try and get a freight quote on monday. All I would need you to do is drain the fuel, crate the unit, and possibly load it on the truck.

    I have never shipped a unit this size so I am unsure of the details myself.
     

Share This Page