1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Toro dingo wheel motor

Discussion in 'Mechanic and Repair' started by Maple Wood, Jan 22, 2013.

  1. Maple Wood

    Maple Wood LawnSite Senior Member
    Posts: 322

    Does anyone know of a place that rebuilds dingo wheel motors? I need one!
     
  2. Landrus2

    Landrus2 LawnSite Platinum Member
    Posts: 4,811

    Try eBay #130744754669
     
  3. BigFish

    BigFish LawnSite Silver Member
    Posts: 2,907

    That ain't no wheel motor! You do know the difference, right???
     
  4. BigFish

    BigFish LawnSite Silver Member
    Posts: 2,907

    Check yer PMs
     
  5. Landrus2

    Landrus2 LawnSite Platinum Member
    Posts: 4,811

    First off you need to find out what the problem is. Is is just a bad seal, or is it one bad bearing busting the seal or is all the bearings (most of the motors have multiple bearings) , etc etc.

    Once you figured out the what needs to be replaced, then you go to the Toro website and find the part of the website where you pull up Toro Dingo parts and operator manuals. Then you enter your model number and serial number and at the bottom of the page is a pdf file on the parker and ross motors. You have to go in there to find out the part numbers for the things inside that motor that need to be replaced.

    After you got the numbers you need to find a Parker and Ross dealer to get you the parts. Toro Dingo dealers can not get these parts through Toro, you have to find a Parker and Ross dealer. and then you have to find a Parker and Ross dealer that will call you back (thats the fun part)

    With all the BS you have to go through to fix these motors sometimes its just easier to buy a brand new one and slap it in
     
  6. LandscaperPro

    LandscaperPro Sponsor
    Posts: 461

    Follow joesimoes's advise and get ahold of me with the information. We offer new wheel motors, hydro pumps, and seal kits for all of these.

    Thanks,
    Blake
    Landscaper Pro
    1-800-222-4303 ext. 124
     
  7. teckjohn

    teckjohn LawnSite Senior Member
    Posts: 258

    Here is a pump I have
    [​IMG]
     

Share This Page