Toro pdf service manual

Discussion in 'Mechanic and Repair' started by s9496, Jun 14, 2014.

  1. s9496

    s9496 LawnSite Member
    Posts: 5

    Picked up a backup and needs a tune up.
    I have gone to the toro website looking for a service manual for a Z-master 150 but the link is dead. Any place a person can download one.
     
  2. BigFish

    BigFish LawnSite Gold Member
    Posts: 3,171

  3. s9496

    s9496 LawnSite Member
    Posts: 5

    I have info on the Kohler engine, but want to do work the deck and hydro pumps
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

  5. s9496

    s9496 LawnSite Member
    Posts: 5

    It is Toro Z Master 150 Model 74178 spec # PS-65593 Serial # 3312520541. Thanks if anyone can help.
     
  6. s9496

    s9496 LawnSite Member
    Posts: 5

    I have done some test cuts and noticed a strip between the center and left blade that cuts ragged, The deck is clean and I decided to remove the deck and check the spindles. I first thought the bearings on the right spindle were gone but closer checking found the nut was loose bearings and races look good. The manual is needed to check all specs to determine the cause of the poor cut.
     
  7. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

  8. s9496

    s9496 LawnSite Member
    Posts: 5

    Thanks for the link. Do you know the recommended pounds of torque for the spindle jam nut? I thought there might be a service manual with this info but I'm not finding that.
     
  9. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    If there's a torque it will be in the manual, May even be in the owner's manual......
     
  10. BigFish

    BigFish LawnSite Gold Member
    Posts: 3,171

    There's a complete section on spindle repair in the service manual.
     

Share This Page