Toro T-Bar pulls to one side

Discussion in 'Mechanic and Repair' started by EngineeredLawns, May 23, 2007.

  1. EngineeredLawns

    EngineeredLawns LawnSite Member
    Posts: 100

    My Toro 36" WBH belt drive T-Bar pulls to one side when the T-bar is fully depressed. Both belts are tight. Is there any adjustment for this, I have not found any thing about it in the manual. Thanks
     
  2. pugs

    pugs LawnSite Gold Member
    Posts: 3,023

    Check the tire pressure on both sides is my only suggestion. There is no tracking adjustment for belt drives. If the belts are tight and the tires are the same diameter it goes straight.
     
  3. lawnmaniac883

    lawnmaniac883 LawnSite Silver Member
    Posts: 2,613

    ^^ This is true unless one of your belts is worn down, glazed and slipping.
     
  4. GSPHUNTER

    GSPHUNTER LawnSite Senior Member
    Posts: 310

    If the adjustments are at opposite ends of the belt tensioner rod, I would have to believe that it would not track straight when the T-bar is fully engaged. Make sure the adjustments are at about the same place.
     

Share This Page