Toro WB T-Bar Adj.

Discussion in 'Mechanic and Repair' started by JOSH6277, Sep 19, 2006.

  1. JOSH6277

    JOSH6277 LawnSite Member
    Posts: 12

    Hi,
    I have a 96' Toro Proline, 52" WB, W/ T-Bar Control, Belt Drive. When going in reverse the belts jump off. Are there any hints tricks to getting the T-Bar adjusted right? The belts are not in the best shape, so I am not sure if that is causing the problem or not. Any help on getting the T-Bar set correctly would be great. Thanks.
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

  3. z_clark

    z_clark LawnSite Senior Member
    Posts: 369

    Disconnect the long brass rods that link the T-BAR to the pressure pulley that pushes the belts. You can adjust them by screwing up or down on the connector between the brass rod and pressure pulley.

    Once the drive is set, you have to fiddle w/ the brake in similar fashion. It is trial and error to get them even so the parking brake will work.

    let me know if you have any questions.
     

Share This Page