toro z master

Discussion in 'Mechanic and Repair' started by wpr, May 15, 2008.

  1. wpr

    wpr LawnSite Member
    Posts: 2

    Engine will not stay running unless I hold the key in the start position.Just replaced the switch and this did not fix the problem.
     
  2. CutApproved

    CutApproved LawnSite Member
    from NJ
    Posts: 234

    Check all the connections. Thats weird,,, maybe there is a short someplace. If you replaced the switch then something must be shorting it out causing it not to stay in the correct position.
    Did you call you dealer? They at least might be able to walk you through the problem.
     
  3. wpr

    wpr LawnSite Member
    Posts: 2

    Yeah I called the dealer They are not sure either at this point.
     
  4. FIXDISS

    FIXDISS LawnSite Senior Member
    Posts: 445

    Please post model #'s for the unit and engine as well if possible,/ you may have the wrong switch.
     
  5. 0526

    0526 LawnSite Member
    Posts: 10

    Likely a bad seat switch. Not involved when starting.
     

Share This Page