Towing a Landscape trailer

Discussion in 'Trucks and Trailers' started by Lawns2nv, Oct 26, 2001.

  1. Lawns2nv

    Lawns2nv LawnSite Member
    Posts: 39

    Hi guys, I'm jus strating off in the Landscape business. I own a 92 manual 2wd v6 S-10. I was woundering if i could tow a small open Landscape trailer W/ a ZTR & walkbehind. I no a S-10 is not a Heavy duty truck. I jus wanna due it for 1 season to save money to buy a 3/4. Will a S-10 tow it ok, or am i crazy for thinking this. Thanks..
     
  2. Robert Doubrava

    Robert Doubrava LawnSite Senior Member
    Posts: 342

    if my dad can pull a car out of a ditch with his little toyota 4 cylinder pickup, than you should be able to pull that trailer with yours.
     
  3. captdevo

    captdevo LawnSite Senior Member
    Posts: 932

    with the right hitch set up, you should have no problems.

    depending on the size and weight of the trailer, i would add electric brakes for added safety and longevity of the brakes on your S-10

    remember, it's easy to move it, but you gotta be able to stop it too!!

    Dave
     
  4. Mowman

    Mowman LawnSite Senior Member
    Posts: 553

    Let me say this to you. Yes, you can. You are in better shape than I. I have a 1998 S-10 w/2.2 Vortec 4 and I'm pulling a 5x10 open trailer and a Walker ZTR. Total weight is approx. 2000#. I'm looking for a full size truck for next season. Chevy WT 1500 w/4.3 V-6 or a Ford F150 w/ 4.9EFI inline 6.
    My S-10 gets the job done now but is working very HARD. Do you have the 4.3 or the 2.8? The 4.3 V-6 should do a very good job for what you are trying to pull right now. However if you have the 2.8 V-6 you are in the same boat as I with the 4 banger. I was told the 4.3 Vortec or the 4.9 EFI Ford will meet my needs. Good luck with your next purchase. You have come to the right place to get the right information before you make your next truck choice.
    If you have any other questions feel free to drop me an e-mail.

    Mowman
     
  5. 75

    75 LawnSite Senior Member
    Posts: 992

    Captdevo's got it right - many people seem to worry about how much their truck can pull, forgetting that what's really important is how much it can STOP!

    A small trailer like you describe should be within the S-10's capabilities. The point about the right hitch setup is also important, as is weight distribution on your trailer. If the trailer is loaded too heavy to the back, it's "tongue weight" (the amount of weight on the hitch) is reduced and if the tongue weight is too light, all kinds of interesting things happen such as the trailer trying to pass you or throwing the back end of your truck around.

    Correct me if I'm wrong on this guys, but I believe that ideally, tongue weight should be around 10% of the trailers total weight - if you have a 1000# trailer, tongue weight should be around 100#
     
  6. Eric ELM

    Eric ELM Husband, Father, Friend, Angel
    Posts: 4,831

    Most hitches are only good for 200 lbs of tongue weight too. I agree, how you have your equipment loaded makes a big difference, especially when pulling with a light truck.
     
  7. mklawnman

    mklawnman LawnSite Senior Member
    Posts: 634

    Speaking of tongue weight, we have a 6x12 open single axle trailer. Using a 1998 Ford Ranger 4.0L 4x4 to pull it with. Problem is, trailer is to small for our equipment. Have a JD 525 which is a three wheeler, and a Turf Tiger on the tail end of the trailer. The Turf Tiger weighs too much but the only place we can put it is on the tail end of the trailer to fit. So what happens is the tongue weight is a bit light. If u get the trailer swinging just a bit its a little tough to get it straightened out again, but nothing bad has happend. Next year probley getting a open 16ft trailer with brakes. With a JD F710 and the Turf Tiger. Truck should be able to pull that. In a few years after college ill get a Ford F-350 Diesel :D
    Matt
     
  8. m&m

    m&m LawnSite Member
    Posts: 169

    i agree how much u can stop is most important. as far as pulling it depends on where the weight is on the trailer. if u can keep most weight ( the mower) just a little bit in front of the axle, you should be o.k. the farther back the weight, the heavier it is.
     
  9. 75

    75 LawnSite Senior Member
    Posts: 992

    Tongue weight being too light can cause the problem that mklawnman mentions - "tail wagging the dog" as one person described it to me!

    The tongue weight being too heavy can also cause problems, especially when towing with a smaller truck. Too much weight on the trailer tongue may make the back end of the truck "squat" down, taking some of the weight off the front (steer) tires and making it harder to control.

    An extreme example of this (and I've seen it done! :eek: ) is a 1-ton tow truck hauling a 3-ton or similar truck. Front wheels practically in the air, steering is a matter of cranking the wheels over & tapping the brakes: every time the brakes come on the front wheels touch down and guide the truck over a bit!

    So, like the guys have pointed out, proper weight distribution is important!
     
  10. LawnPro in NC

    LawnPro in NC LawnSite Member
    Posts: 101

    I pull a 20' open trailer with a 96 4.3 S-10. Woods 6215 w/ hopper, 36' w/b 2 weedeaters, stickedger, cage on the front and rack on the side. I have weight distribution bars Made by Reese. They run about 600.00. I traded them for some work. I can pick the rear of my truck up by tightening up on the bars. I also have brakes on both axles. I have no problems as of yet. But I'm careful not to follow to close. It also reduces or eliminates the sway. I'm not in a position to buy a truck now but maybe next summer. Have to make it through the winter first.

    I definatley recomend the weight bars. If anyone wants more info email me at DJMTAN@aol.com.
     

Share This Page