Trac Vac on Exmark TTHP?

Discussion in 'Lawn Mowing' started by Eclipse, Mar 4, 2007.

  1. Eclipse

    Eclipse LawnSite Bronze Member
    Posts: 1,149

    My dealer suggested not to intall a Trac Vac on a Turf Tracer HP. Their concern is the weight of the Trac Vac on the frame of the TTHP. They suggested a Trac Vac should only be installed on a full size Turf Tracer.

    Would a Trac Vac be ok installed on a Turf Tracer HP?
     
  2. Scag48

    Scag48 LawnSite Fanatic
    Posts: 6,067

    I think you've already answered your own question. If the dealer said not to, I probably wouldn't do it.
     
  3. EMTDUCK1984

    EMTDUCK1984 LawnSite Member
    Posts: 180

    The Frame Is Built The Same On Both Units It Would Be Totally Up To You Worst Case If It Broke Anything You Can Beef It Up
     
  4. cemeteryman

    cemeteryman LawnSite Member
    Posts: 107

    I have a large trak-vak on my lazer Z 27hp., and I would not attempt to put it on anything smaller. When it is getting full my mower bogs down, and it is quite a lot of weight to be beating around on the back side of the frame.
     
  5. Eclipse

    Eclipse LawnSite Bronze Member
    Posts: 1,149

    Isn't the frame smaller in structure and size of materials?
     
  6. EMTDUCK1984

    EMTDUCK1984 LawnSite Member
    Posts: 180

    Materials No What Does This Trac Vac Look Like Cause If Its Like What Im Thinking About It Should Be Fine On An Hp
     

Share This Page