trailing arms/ chariot jr.

Discussion in 'Great Dane' started by strickdad, Mar 31, 2003.

  1. strickdad

    strickdad LawnSite Senior Member
    Posts: 544

    as many of you know we are big greatdane people here.(3 jrs. 1 scamper) i am begining to see a little wear on the trailing arms on 1 of our jrs. and im wondering if gd. makes a pin and bushing kit to repair this.... the wear is on the deck side of the arm..
     
  2. John Joensen

    John Joensen LawnSite Member
    Posts: 68

    Strictdad:

    You can purchase replacement Bushings to repair your Thrust Arm's. The part number is D-18076. The cost per bushing is roughly $2.00 each. See your local Great Dane dealer to order these.

    Thank You!

    JMJ
     
  3. strickdad

    strickdad LawnSite Senior Member
    Posts: 544

    john, do these bushings include pins? i dont see how you can install bushings (which will be smaller in diameter than the orginal hole) and still use the same pins..
     
  4. John Joensen

    John Joensen LawnSite Member
    Posts: 68

    strickdad:

    This does not include the pins. The pins can be purchased from our dealer. Please see your local Great Dane dealer for additional assistance.

    JMJ
     
  5. strickdad

    strickdad LawnSite Senior Member
    Posts: 544

    ok thanks for your help on this..
     

Share This Page