Truck bed for a chassis cab

Discussion in 'Marketplace' started by KathysLGC, Mar 6, 2010.

  1. KathysLGC

    KathysLGC LawnSite Bronze Member
    Posts: 1,345

    We had this bed removed from one of our trucks (2001 Chevy 2500) and had a custom rack body built for it.

    We are asking $1200.00 or best offer for this bed. It has diamond plated floor and fiber glass sides and a tool rack welded on the side to hole shovels, picks, etc.
    It is a heavy duty bed and will fit regular or dually trucks. It does not come with the hoist. All we did was take the bed off and reused the hoist on the new custom bed. This bed is 7.5 feet wide and 8.3 feet long. The bed is in very good condition and is located at Ferrara Industries in Norwalk, CT. They are the ones who removed the bed and made our new bed. They can install this bed onto your truck as well but I don't know know their pricing.
    They give us good pricing and they know people will be going there to look at it. It is surrounded by pieces of their other jobs so please don't be discouraged by the mess in the pics. They have limited space and this needs to sell ASAP so any reasonable offer accepted.

    Truck Bed 5.jpg

    Truck Bed 4.jpg

    Turck Bed 3.jpg

    Truck Bed 2.jpg

    Truck bed 1.jpg
     
  2. KathysLGC

    KathysLGC LawnSite Bronze Member
    Posts: 1,345

    Still available
     
  3. JJS

    JJS LawnSite Senior Member
    Posts: 334

    $800 i'll pick it up tomorrow?
     
  4. rusty_keg_3

    rusty_keg_3 LawnSite Bronze Member
    Posts: 1,469

    How much is a hoist? Like 3k right? Any pics (like when it was on a truck), and roughly how much dose this weigh? Would it be easy to put it on a 09 Chevy Silverad0 3500HD SRW?
     
  5. rusty_keg_3

    rusty_keg_3 LawnSite Bronze Member
    Posts: 1,469

    And how tall are the sides?
     
  6. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    are the sides perm, or can you take them off??
     
  7. THEGOLDPRO

    THEGOLDPRO LawnSite Fanatic
    Posts: 5,223

    ill give you 850.
     
  8. KathysLGC

    KathysLGC LawnSite Bronze Member
    Posts: 1,345

    The sides do not come off. The bed is in pretty good shape. We used the truck mostly for mulch and plants. It holds about 5 yards of mulch. The hoist shouldn't be too expensive and Ferarra (where its at) can answer if it will fit the 09. They are installers and made our custom bed so i'm sure they can make the bed fit any truck. It needs to sell ASAP. I havent had a chance to put it on ebay. The sides are about 4' high.
    Not sure what it weighs but it is a heavy duty bed. Anyone interested can call me on my cell phone at 203-943-8609

    It's still in Norwalk, see address below

    J & J Ferrara Indl Incorporated
    2 S Smith St, Norwalk, CT 06855
    Cross Streets: Between Fort Pt St and Reynolds St
     
  9. KathysLGC

    KathysLGC LawnSite Bronze Member
    Posts: 1,345

    The pictures dont do this bed any justice. Jimmys shop was a mess at the time because he was moving things around from winter. They sell plows and sanders as well. I will see if he cleaned up any more and take new pictures tomorrow if he did. I will be in Norwalk tomorrow untill about 12pm if anyone wants to see it/buy it. You can then talk to jimmy on pricing to install it on your truck.
     
  10. KathysLGC

    KathysLGC LawnSite Bronze Member
    Posts: 1,345

    Will consider a trade for this as well. Now asking $1000 or best offer. Needs to sell ASAP!
     

Share This Page