1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Turbo Turf Hydroseeder

Discussion in 'Marketplace' started by Husky05, Nov 1, 2012.

  1. Husky05

    Husky05 LawnSite Senior Member
    Posts: 303

    Hello, I am selling a used Turbo Turf Hydroseeder. I bought this machine new from the manufactor in Beaver Falls, PA in approximately 2005. I have used this machine for my small amounts of Hydro-seeding I do within my landscape company. It is a 500 gallon jet Spray skid machine. It is in good working condition and could go to work today if you so desired. It has a 13 horsepower Briggs and Straton Motor. The pump works as it should, it comes with a gun and 3 nozzels and 100 feet of hose. The only thing that is wrong with this machine is I accidently cracked the lid that goes on the top of the unit. It still screws off and on but it is cracked. A new plastic top is inexpensive, like I said it is still very useable. If you have any questions please do not hesitate to call or text me at 412-818-7432. I am asking 3,000.00 for the machine.



    Thanks for looking

    photo[1].JPG
     
  2. Husky05

    Husky05 LawnSite Senior Member
    Posts: 303

    Anyone need a hydroseeder?
     
  3. DGM

    DGM LawnSite Member
    from Ga.
    Posts: 154

    Yes but 3,000 is pretty steep
     
  4. DEPENDABLE LANDSCAPING

    DEPENDABLE LANDSCAPING LawnSite Bronze Member
    Posts: 1,343

    Husky, i have to agree you may be a little high on the price.
    Posted via Mobile Device
     
  5. Husky05

    Husky05 LawnSite Senior Member
    Posts: 303

    How about 2500
    Posted via Mobile Device
     
  6. csl

    csl LawnSite Member
    Posts: 235

    can you give me a price on shipping to spokane, 99207? thanks
     
  7. Husky05

    Husky05 LawnSite Senior Member
    Posts: 303

    what is your zip
     
  8. csl

    csl LawnSite Member
    Posts: 235

    just gave it to you, 99207
     
  9. 2low4NH

    2low4NH LawnSite Bronze Member
    from NH
    Posts: 1,892

    how did you bend the skid frame? I would consider picking this up but not for 3k
     
  10. Husky05

    Husky05 LawnSite Senior Member
    Posts: 303

    I bent it with the forks on my bobcat putting it away one day pushing it against a concrete wall. It still works with forks I'll take 2500 for it
    Posted via Mobile Device
     

Share This Page