Ultra Vac - Lazer vs. Lazer HP

Discussion in 'eXmark' started by Eclipse, Feb 3, 2008.

  1. Eclipse

    Eclipse LawnSite Bronze Member
    Posts: 1,149

    I was wondering if an Ultra Vac from a 52" Lazer HP (Trivantage Deck) will mount onto a 52" Lazer (with an Ultra Cut Deck).

    Thank you.
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Eclipse,

    Anything can be done.......but this would be really tough! You would be much better off buying a new bagger than buying new assemblies and parts to make it work. Even then, it may not work properly. Hope that helps!

    KC
     
  3. Eclipse

    Eclipse LawnSite Bronze Member
    Posts: 1,149

    Thank you for the quick reply.

    Another quick question since I will be better off buying new.

    Can I put a 3 bag Ultra Vac on a 52" Lazer Z or am I better off with the 2 bag? I generally only see the 3 bag on the 60" but they are the same frame as the 52" so I am wondering if a 3 bag unit on a 52" is a good or bad idea.

    Thank you again.
     
  4. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Eclipse,

    No, the LAS 52" does not come w/ a 3 bag UltraVac option. It has to do w/ the width of the bagger, and the weight distribution. If it were possible, and still safe, we would offer it, hence the 2 bag only option for the 52".

    Sorry,
    KC
     

Share This Page