1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Ultracut pictures for TLS

Discussion in 'Lawn Mowing' started by tacoma200, Aug 21, 2006.

  1. tacoma200

    tacoma200 LawnSite Fanatic
    Posts: 5,426

    Heres a few pictures and measurements. The deck is 5.5 " deep. The blades are about .25 inches from the internal baffles. The front of the internal baffle is only 4" as it tapers down in the front to let grass stand up I assume. It's about 4" from the front baffle to the front of the deck. You can see where the front baffle tapers to a shorter lenth up front. If you need more measurements let me know. This was kind of a quickie job not knowing exactly what you were looking for.



  2. TLS

    TLS LawnSite Fanatic
    Posts: 7,940


    I'm mainly concerned with the cut plane in reference to the front baffle.

    IIRC, the blade cut plane (arc) was about level with the front baffle.

    So, in this picture, what is the measurement of #1 be?

    #2 was about 1/4" to 3/8" IIRC, right?



Share This Page