velky for exmark 32

Discussion in 'General Industry Discussions' started by lil_cote_93, Feb 8, 2008.

  1. lil_cote_93

    lil_cote_93 LawnSite Member
    from ON
    Posts: 196

    Is it possible to attach a velky to a 32 inch exmark
    The other thing i was wondering, is it alright if you dont have hydro?
    I am only 130 lbs, so dont think it will be bad on the tranny.
    what you think? should i just walk it out?
     
  2. lil_cote_93

    lil_cote_93 LawnSite Member
    from ON
    Posts: 196

    i dont even know where to buy the attachment for it.... Need some help ppl
     
  3. ed2hess

    ed2hess LawnSite Fanatic
    Posts: 13,328

    Well we bought an exmark from our dealer....it is the one wheel type. I think it was around $300.
     
  4. RGM

    RGM LawnSite Senior Member
    Male, from Baltimore Md
    Posts: 979

    I had a exmark 32 belt drive and it pulled me around
     
  5. Roger

    Roger LawnSite Fanatic
    Posts: 5,927

  6. Runner

    Runner LawnSite Fanatic
    Posts: 13,494

    Go with a two wheeled. It will have alot less drag, as it will be lighter on the grass. It will also not leave the center line. This is not to mention that a two wheeled is much more comfortable, as there is more leg and foot room to move around on. This is alot easier on the knees.
    P.S. ...make sure you go with a trailering type, as your mower will not swing a solid mount around. These are all over ebay, and there are some supply houses that sell some decent ones fore around 200 bucks, I think.
     

Share This Page