vibratory plow help

Discussion in 'Irrigation' started by i dig it inc, May 19, 2008.

  1. i dig it inc

    i dig it inc LawnSite Member
    Posts: 22

    I have few questions about vibratory plow blades
    I have dw plow
    What kind of blades you use-size-manufacture?
    How long they hold?
    What to use for wire installation?
    What to use for puling pipes?
    The best pipe puller?
    Thank you
    mo
     
  2. WalkGood

    WalkGood LawnSite Bronze Member
    Posts: 1,910

    I'll bet there's a vid of THAT on youtube!!
     
  3. i dig it inc

    i dig it inc LawnSite Member
    Posts: 22

    thanks
    vibartory plow is new for me
    i need to now what work the best
    mo
     
  4. irritation

    irritation LawnSite Gold Member
    Posts: 3,278

  5. CAPT Stream Rotar

    CAPT Stream Rotar LawnSite Fanatic
    Posts: 5,959

  6. AI Inc

    AI Inc LawnSite Fanatic
    Posts: 25,532

    255 fan here too. We use 12" blades. Like Cappy says , when pulling main and wire just tie the wire to the chain. If we are pulling just a wire we usualy use and old broken blade with a hole drilled thru it and a small chain attatched.
     
  7. Dennis Spencer

    Dennis Spencer LawnSite Member
    Posts: 108

    I would be concern about nicking a wire pulling . The wire blade will lay down the wire as you go.
     
  8. AI Inc

    AI Inc LawnSite Fanatic
    Posts: 25,532

    I wouldnt be. I have put in about 15,000 ft of wire without a prob. Sometimes breaks and ya need a wiring can , but thats about it.
     
  9. CAPT Stream Rotar

    CAPT Stream Rotar LawnSite Fanatic
    Posts: 5,959

    Bingo^

    255 for life
     
  10. i dig it inc

    i dig it inc LawnSite Member
    Posts: 22

    thanks for the input
    did any body have use the "saber cut blades"
    it look good and flexble system
    mo
     

Share This Page