Vinyl handrail

Discussion in 'Hardscaping' started by neversatisfiedj, May 11, 2007.

  1. neversatisfiedj

    neversatisfiedj LawnSite Bronze Member
    Posts: 1,028

    I need to install a vinyl handrail on some steps I'm making out of coventry block with bullnose treads. Any ideas other than screwing them to the treads ?
     
  2. PatriotLandscape

    PatriotLandscape LawnSite Bronze Member
    from MA
    Posts: 1,209

    drill holes and epoxy the bolts into the step.
     
  3. JOE WRIGHT/ WRIGHTFRAMES

    JOE WRIGHT/ WRIGHTFRAMES LawnSite Member
    Posts: 9

    If The Rail Is Your Typical 4 By 4 Pvc. Put A Sonotobe In Your Stairs Filled With Cement. Stick A 4x4 In The Cement And Cut The Bullnose Around It. When Done Screw The Pvc To The 4x4. Secure Strong And Will Last. Have You Seen The Wrightframes Yet
     
  4. JOE WRIGHT/ WRIGHTFRAMES

    JOE WRIGHT/ WRIGHTFRAMES LawnSite Member
    Posts: 9

    What Ever Happened With The Handrails? How Did You Install Them?
     
  5. ChampionLS

    ChampionLS LawnSite Bronze Member
    Posts: 1,066

    It's easier to embed a pressure treated 4x4 into your blocks and fit/cut the cap or bull nose around it. When your done, you can buy a railing kit and post cover and have a beautiful railing.
     
  6. neversatisfiedj

    neversatisfiedj LawnSite Bronze Member
    Posts: 1,028

    You guys are losing me. Wright frames, - we keep trying to get info. Slow go.
     

Share This Page