Walker Deck Gear Boxes

Discussion in 'Mechanic and Repair' started by Tina, May 31, 2004.

  1. Tina

    Tina LawnSite Member
    Posts: 2

    I am Looking for a cast aluminum gear box for a walker mower, this includes T box drive gear boxes. Can anyone help me, I only need the boxes and not the gears.
     
  2. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,104

    I do not have the part number right now but you can get the 'boxes' from Tecumseh. I will try to get you some part numbers from work. The oil seals and gasket are also from Tecumseh. By the way what is wrong with your boxes?
     
  3. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,104

    I hope these help. I got these numbers from work using a Walker we have in the shop for reference.


    "T" box housing=Tecumseh #770117
    Right angle box=Tecumseh #770026A
    Oil seal=Tecumseh #788029
    Cover gasket=Tecumseh #788028
    End cap gasket=Tecumseh #788030B
     
  4. Tina

    Tina LawnSite Member
    Posts: 2

    Our Gaer Box is cracked at the bolt, That is the middle box.
    We do not need any more gears, just the box. Thank you so much for this info.
     
  5. shopbytch

    shopbytch LawnSite Member
    Posts: 37

    Tina, not all gear boxes are the same! bring your old one in and the deck numbers. Save your old box and when there's time take it to a good welding place($25). A smart guy can file down the weld and retap the hole, then you got a spare because they always friggin' crack there.
     
  6. fixer67

    fixer67 LawnSite Silver Member
    Posts: 2,104

    We just got in a center box for a Walker and the number on it was 770039A.
     

Share This Page