1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Walker Wheel Hub Nut Description

Discussion in 'Mechanic and Repair' started by mcambrose, Apr 1, 2008.

  1. mcambrose

    mcambrose LawnSite Senior Member
    Posts: 511

    I have a parts manual but it doesn't have the breakdown of the ground drive system showing the nut which holds the wheel hub on. I know it is a 3/4-16, but I don't know if it is a nut with a washer or a nut with a washer built on. Mine came off when the woodruff key sheared. I thought the transmission was dead or slipping. I put a standard nut on there, but it is too wide. Any help is appreciated.

  2. Lawdog302

    Lawdog302 LawnSite Member
    Posts: 197

    There is a seperate flat washer that goes on there. The description is 3/4 flat A325. Walker has a part number for both. The nut is F315 jam nut and 6207-13 washer. Hope that helps. The nut is thinner than an average nut as well, that is why it is called a jam nut.
  3. mcambrose

    mcambrose LawnSite Senior Member
    Posts: 511

    Thanks a bunch. Just the info I needed.

Share This Page