Wall of water

Discussion in 'Water Features' started by jnd42697, Aug 19, 2007.

  1. jnd42697

    jnd42697 LawnSite Member
    Posts: 7

    Wanting to build a wall of water to go in the entry way of my church. I do not think it is that difficult. Looking for some info on building one. Any help would be appreciated.
     
  2. LTL

    LTL LawnSite Member
    from Tulsa
    Posts: 98

    What is the wall made of and what is behind the wall?
     
  3. jnd42697

    jnd42697 LawnSite Member
    Posts: 7

    Some are made of copper or slate or glass really what ever you want. My main concern is the upper plumbing for the actual water feature.
     
  4. me1223

    me1223 LawnSite Member
    Posts: 35

    most are just pipes with small holes in them every inch or so, the line from the pump comes into one of the ends and out the holes, maybe 1/8" in diameter, towards whatever wall material you are using. The hardest part I think would be mounting or concealing the pipe on top of the wall without it being ugly.
     
  5. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    Nahh, just pump up into a little "pond" at the top of the wall and let it flow over the side/wall.
     
  6. BrandonV

    BrandonV LawnSite Platinum Member
    Posts: 4,260

    try to get ahold of one of these. they'll sheet the water rather nicely

    web.jpg
     
  7. BrandonV

    BrandonV LawnSite Platinum Member
    Posts: 4,260

    Another shot

    web.jpg
     

Share This Page