WATER REUSE FILTRATION MADE EASY The Most Efficient of Its Kind St. Cloud, FL -- Amiad Filtration Systems filter products were selected and installed for the expanded 20.25 MGD water reuse system at the City of St. Clouds Michigan Avenue wastewater treatment plant. The self-cleaning-automatic system utilizes six (6) model EBS-10,000 units with a filtration degree of 200 microns. The cleaning mechanism consist of a suction scanner focus back-flush technology; which takes advantage of simple physics for cleaning (Fig. 1). The decision for using Amiad Filtration Systems was based on the experience of a smaller and successfully operating system previously installed in October, 2003. Fig. 1 Focus Back-Flush The focus flush concept in Figure 1 that Amiad uses specifically exhibits 100% cleaning using the suction scanner technology. The cleaning nozzle is designed within close tolerances to cylindrical screen for high efficiency of back-flushing. During a back-flush cycle, water moves both tangentially and directly into the orifice of the nozzle due to the large difference between operating and atmospheric pressures. Expanding this concept further (Fig. 2); the high velocity (50ft/sec2) combined with the spiral movement of the nozzle(s) across every square inch of screen area effectively removes the entire filter cake without any interruption of flow through the filter units. Typically, back-flushing wastewater is less than 1% of total flow. The simplicity of design, cleaning efficiency, and reliability based on just a few moving parts are the attributes of a low operating and maintenance system favorable for municipal and industrial applications.