waterbox

Discussion in 'Seal Coating Forum' started by shepoutside, Apr 23, 2006.

  1. shepoutside

    shepoutside LawnSite Bronze Member
    Posts: 1,205

    Would any one have a picture of the inside of a water box for brushes? I just was wondering if there are any baffles to control water splash while in motion. Thanks in advance !!!
     
  2. no baffles, those would interfere with sticking the brushes and squeegees inside. Then they just have a U shaped cut-out in the lid for the handles to go thru.

    Pretty simple to make one yourself. Just make a box, a hole for a drain, and a lid with a U, and a hinge. And a drain plug of course. ;)
     
  3. shepoutside

    shepoutside LawnSite Bronze Member
    Posts: 1,205

    Ok thanks, saw the one in the seal-rite catalog, and then saw the price, so figured I'd build my own, just wasn't sure if there was anything else to it. Thanks again !!
     
  4. PROCUT1

    PROCUT1 LawnSite Platinum Member
    from TN
    Posts: 4,909

    Put a grate in it about 1/4 of the way up from the bottom. This way your brushes will sit on the grate and any accumulated sealer and crap will settle.
     
  5. shepoutside

    shepoutside LawnSite Bronze Member
    Posts: 1,205

    Great idea!!! Thanks, I will weld that in tommorw night :) thanks again !!!
     
  6. yeah i thought the price was a bit much too, but mine came with the set-up i got :|

    great idea about the grate.
     

Share This Page