1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

WE Chapps trimmer covers

Discussion in 'Lawn Mowing' started by Lawn Dog2001, Mar 6, 2004.

  1. Lawn Dog2001

    Lawn Dog2001 LawnSite Bronze Member
    Posts: 1,027

    I am planning on ordering some trimmer covers for this year and I wanted to hear some experiences from people who own, and use them.

    I also wanted to know if you guys found it worth while to get the heat lined covers for the extra money, or did you find the plain regular covers were good enough. Also how have they held up for you over time?

    Any opinions are appreciated.
  2. johnbast3

    johnbast3 LawnSite Member
    Posts: 54

    If your in business for your self--ONLY Bush in 2004
  3. Pecker

    Pecker LawnSite Bronze Member
    Posts: 1,454

    I bought a b/p blower cover (regular - lining) about 2 months ago and it seems real good. I also have a couple TrimmerTrap trimmer covers. Both brands seem to be made out of the same material and of the same quality. They also haven't torn up on the highway. This is year number two for the TrimmerTrap ones. To ansewr your question, although I haven't had them for many years, either brand are worth the money and I'd do it again. Remember though, I am basing my opinion only on the few items I have.
  4. draftlawncare

    draftlawncare LawnSite Member
    Posts: 225

    where can you get these covers at
  5. proenterprises

    proenterprises LawnSite Silver Member
    Posts: 2,297

  6. draftlawncare

    draftlawncare LawnSite Member
    Posts: 225

    never mind saw them on the net kinda $hitty looking i was looking for something like the stihl chainsaw covers but for a weedeater. something with a hard case that opens and covers just the motor not the shaft
  7. dkeisala

    dkeisala LawnSite Senior Member
    Posts: 911

    ....and a multi-millionaire
  8. Lawn Dog2001

    Lawn Dog2001 LawnSite Bronze Member
    Posts: 1,027

    Glad to hear you like yours. How does your blower cover hold up, if the exhast is still hot when you put it on?

    TURF DOCTOR LawnSite Silver Member
    Posts: 2,138

    W.E. Chapps.com I love mine the heat liners are expensive but they work. Best money i ever spent until i went to enclosed trailer's
  10. Pecker

    Pecker LawnSite Bronze Member
    Posts: 1,454

    Lawndog, I don't put my covers on right after using the equipment. I usually hang it on the rack, pick another tool, and when I get back, the first tool is cool enough to put the cover back on.

    So far, holding up well. Only time will tell. I'm the type of guy that doesn't mind spending a little extra to get the highest quality equipment or whatever, but I only want to buy it ONCE. I hate to have to replace stuff because it is made cheap. Hopefully these covers will meet my demand. So far so good.

Share This Page