Weekend small playscape build

Discussion in 'Original Pictures Forum' started by TX Easymoney, Dec 19, 2012.

  1. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Posts: 4,071

    Bought this one from Sam's Club--~$900

    seemed to have all the requisite stuff...swings, slide, climbing wall--playhouse up and down....as a plus it seemed to be a little more custom than the others also didn't cost $3k like the popular brands...seemed to be made in America :clapping:...Arkanenseebama or someplace...

    Although it was not quite as sturdily built as some of the others....my dad figured for a $100 we could reinforce if necessary--

    Step one was laying all the stuff out in a logical order--
    --all the parts were numbered
    Step two was getting all the necessary tools ready-
    --a condless impact wrench and condless screwdriver made things go lots easier than turning screws and bolts by hand

    lots and lots of parts....be organized or you will hunt for the parts!

    2012 Dec 109.jpg

    2012 Dec 113.jpg

    2012 Dec 114.jpg
     
    Last edited: Dec 19, 2012
  2. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Posts: 4,071

    After 3 hours with 2 guys here was the progress
    kinda lame progress...but I got to spend time with my dad-

    2012 Dec 116.jpg

    2012 Dec 117.jpg
     
  3. Chris_NC06

    Chris_NC06 LawnSite Fanatic
    Male, from Sanford, NC
    Posts: 6,777

    Look forward to seeing the finished product.
    Posted via Mobile Device
     
  4. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Posts: 4,071

    Thanks...more tomorrow or friday.
     
  5. TX Easymoney

    TX Easymoney LawnSite Platinum Member
    Posts: 4,071

    finished product ready to go--

    I need to take a photo with the x-mas lights on it--

    2012 Dec 121.jpg

    2012 Dec 003.jpg

    2012 Dec 005.jpg

    2012 Dec 006.jpg

    2012 Dec 031.jpg

    2012 Dec 030.jpg
     

Share This Page