Whats it worth (Scag)

Discussion in 'Lawn Mowing' started by SJR Lawncare, Dec 12, 2002.

  1. SJR Lawncare

    SJR Lawncare LawnSite Senior Member
    Posts: 250

    What do you guys think a 2001 52 Scag swz fixed deck 17 Kaw with approx. 300-400 hours is worth. I am selling mine & looking to get top dollar for it considering its been very well taken care of & has very little hours on it. I just DO NOT LIKE THE CUT!! I paid $5149 for it with a Grass gobbler bagger & 1 wheeled Velkie 2 seasons ago. I am gonna convert to Exmark because alot of you guys really recommend them. I have a guy who wants it, but I will not tell how much he has offered till you guys respond.

    Thanks SJR
     
  2. ProLandscapes

    ProLandscapes LawnSite Member
    Posts: 185

    I would say $3000 if it's in really good condition.


    JT
     
  3. mklawnman

    mklawnman LawnSite Senior Member
    Posts: 634

    Hummmmmm, that seems odd that it cuts bad????? I have the exact same mower as you do and I think the cut is great. All you gotta do is adjust the spacers under the mower and the front ones if need be. I wouldnt know totally on price but that sounds like a good estimate on the machine.
    I love mine :)
    Matt
     
  4. landman

    landman LawnSite Member
    from NJ
    Posts: 110

    $2500.00 at best, but I'll give you $2200 for it without the velke.
     
  5. Shady Brook

    Shady Brook LawnSite Bronze Member
    from Indiana
    Posts: 1,517

    Do you have the advantage deck?

    If your mind is made up that is fine, but just a couple thoughts.

    Have you tried everything to change the cutting performance, ie blades, deck pitch, rake, deck height? I just hate to see you eat it for such a loss if you can improve the performance.

    I purchased a 48 fixed deck exmark last year cus everybody said exmark rules. I tell ya what, it cuts pretty but has ferocious blowout. I can not contain the blowout no matter what. I will have to add a home made baffle, or sell her.

    Anyway, my scag walkbehinds will cut pretty as well, but one thing I have found is deck height is critical where I live. If I try to mow 3 or above inches, it seems to lay down the grass. With doubles and just under 3", they cut real well, and discharge well also.

    Just don't expect a miricle when going from one commercal mower to another. Some guys mow in enviornments that may be radically different to the ones we mow in, and therefore we can not expect the same results.

    Don't take the loss unless your mind is set on it.

    Take care
    Jay
     
  6. SJR Lawncare

    SJR Lawncare LawnSite Senior Member
    Posts: 250

    Jay,
    I do have the advantage deck. It leaves uncut grass all the time, & the cut just looks bad. I have to go like 2 MPH just to get a decent cut. I use doubles, thinking that will correct the problem, but no. My blades are always sharp & I usually cut at 3". The guy offered me $2700 for it.

    Thanks guys
     
  7. grassdaddy

    grassdaddy LawnSite Senior Member
    Posts: 565

    we have the same machine and it does not cut good over 3 inches ! we try to cut every thing @ 2 3/4 inches with it . we do love the scag , cranks great every time , great on gas and we have
    a good dealer to give us help when needed .it is built like a tank !
    my buddy has an ex-mark that does the same thing .i would not take the loss . too much money invested and too much money to
    lose ! :blob4:
     
  8. Jimbo

    Jimbo LawnSite Bronze Member
    Posts: 1,093

    First off I should answer your question. $2700-$3500.00 depending on how it looks and runs. Some peoples excellent is not the same os others.

    Second, about the cut.

    I have a 52" Scag Tiger Cub and I can tell you that running high lifts, and high lift gators in tall grass 3.5" or over and the cut is bad. If you put on regular blades or lower the deck and the cut is great.

    Doubles? I dont doubt for a minute you are having problems (Too much turbulance under the deck). Did you try adjusting the front deck baffle to the lowest position? If not try that before you sell.

    Jim
     
  9. TLS

    TLS LawnSite Fanatic
    Posts: 7,940

    SJR,

    What RPM's are you running?

    The higher your cut the worse any mower cuts. But 3" it should cut real nice at all but the higher speeds. 52's have a nicer cut than a comparable 48". Although everyone talks about how GOOD eXmarks cut is, to just trade in an otherwise new mower just cause your not 100% happy with how you think its cut would compare to another mower is just.... :dizzy:

    You have a LOT of choices with SCAGS. Lots of different blade types/designs, lots of different adjustable positions under the spindle, etc.

    Check those RPM's (~3700) and try some nice solid foil fully sharpened highlift blades.

    Good Luck!
     
  10. lawnkid

    lawnkid LawnSite Senior Member
    Posts: 935

    I agree with all of the guys who support the Scag.

    SJR LawnCare,
    I have the same mower as you too with only a 14hp Kaw. I had the same problem like you but I kept adjusting and now it cuts and stripes excellent at any height. You just have to keep playing with those spacers and the cut will be fine. The reason why most guys say the Exmark is good is because the spacers are prbabbly adjusted perfect. In my opinion, Exmark is no better than a Scag mower. You just have to keep adjusting. And another thing in my opinion, doubles don't really do much more than regular sharp OEM blades do. I've tried doubles and am not too impressed in the difference because I didn't see one. Oh Well, if it were me, I would keep playing with those spacers because would you rather spend aanother $2000 again to get another new mower when all you have to do is adjust. I bet you could get another 1500 hours or so out of that mower. It's just not worth it I don't think. It's your call though so... Do what's best for you. Peace
     

Share This Page