wireing diagram

Discussion in 'Mechanic and Repair' started by mike green, May 18, 2007.

  1. mike green

    mike green LawnSite Member
    Posts: 17

    does anyone know where i can find a wireing diagram for cub kedet model no,132 233f100 ser no,208501 thanks for reading
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    You need to double check that model number, It's not coming up and looks like a 1992 push mower number with the 233 ......

    Is it a tractor ?

    If it has a Briggs engine what's the first two digits of the code number ?
     
  3. mike green

    mike green LawnSite Member
    Posts: 17

    rob thanks for the reply the numbers are correct it is a lawn tractor with a 12.5 kohler theblower housing on engine is newer than the motor cv12 5s spec 1270 ser 2328619038 thank you mike.
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    Mike,

    I work for a Cub dealer and I have exhausted all avenues trying to find this model number. Is there a model number decal on the side of the hood ?
    Example; 2166 etc., While Cub is now owned by MTD some Cubs are listed under the number on the hood and not the white decal under the seat.
     
  5. Bill Kapaun

    Bill Kapaun LawnSite Senior Member
    Posts: 915

    Also do you need the wiring diagram for just the tractor, the engine or both?
    Engine only diagram is pretty easy to find.
     
  6. mike green

    mike green LawnSite Member
    Posts: 17

    mower has no hood the numbers are off the tag mounted on the frame by the gas tank i need the diagram to wire the key switch the owner cut the wires to get the switch out he lost the old switch with the plug @ wires the only other numbers are on the mower deck Lt 38 mod,38676 ser,44190 thanks for the help mike.
     
  7. Bill Kapaun

    Bill Kapaun LawnSite Senior Member
    Posts: 915

    Maybe if you list the color of the wires going to the switch?
     
  8. mike green

    mike green LawnSite Member
    Posts: 17

    the switch doesnt have any lettering on the termanals but the colors in the switch harness 2 blue together 1 yellow 1 black 2 red @2 more red thanks again elect,is my weekness l.o.l. the switch pos,off,on lights ,on pto,start if this was ayp, or murry ,later mtd, wouldnt pe a problem,just havent had much international exp, thanks guys m,g,
     
  9. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    Mike,

    I found the wire diagram for your model 132-233F100 Cub Cadet "HOOD" decal model number (1330).

    The only problem is.....The PDF electrical schematic file covers EVERY unit they ever built. The dang thing is 131.34 MB, I'd be all week tryin to down load this on my dial-up here at home. :cry:

    From what little I did down-load it looked like the two blue wires are headlights, Yellow is the mag, Black start but you lost me on how you stated the reds.

    If you don't mind be more specific on them.

    Oh, I was going to suggest just replacing the whole harness but, That thing must have gold in them there wires.
    List price is $ 285.00.....No I didn't hit the wrong keys, Thats two hundred and eighty-five dollars. :dizzy:
     
  10. mike green

    mike green LawnSite Member
    Posts: 17

    rob the red wires are what got me that and no id marks on the termanals on the key switch any how 2 reds go to top of pto swt, the other 2 reds go to termanals at bottom of pto it looks like 2 reds cant tell what pair comes out of the harness @goes to a micro switch thatused to mount on the hydro control,this thing is kickin my tail bad l,o,l, i guess im going to split the whole loom apart was trying to avoid that if pos, many thanks m,g,
     

Share This Page